LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 827 (Body Rear End) >> Repair Instructions >> Panel Replacement - Removable Rear - Mid Gate >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the panel to the vehicle
    2. Fig 1: Installing Rear Mid Gate Panel To Vehicle
    G01459369Courtesy of GENERAL MOTORS CORP.
  2. Install the Hinges to the panel. Refer to HINGE REPLACEMENT - REMOVABLE REAR PANEL - MID GATE 
  3. Check the operation of the mid gate by opening and closing the mid gate.

    Align the mid gate if necessary.

  4. Fold the rear seat back up.
scientia non olet · About LEMON Manuals