LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 827 (Body Rear End) >> Repair Instructions >> Grate Replacement - Load Floor Water Management (Avalanche) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear compartment cover assembly.
  2. Remove the load floor mat from the vehicle.
  3. Pull up on the grate panel in order to remove.
  4. Remove the bolts from the panel assembly - load floor trim.
  5. Remove the panel from the vehicle.
    6. Fig 1: Removing Bolts From Panel Assembly - Load Floor Trim
    G01459521Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals