LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 826 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Rear Upper (Avalanche/Escalade Ext) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector, if equipped
  2. Install the upper garnish molding until it snaps into place.
  3. Install the plastic push pins (1) to the upper garnish molding.
  4. Install the third pillar trim panels. Refer to GARNISH MOLDING REPLACEMENT - REAR DOOR UPPER  .
  5. Install the rear window to the vehicle.
    Fig 1: Installing Plastic Push Pins
    G01459321Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals