LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 826 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Center Pillar >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the pillar moldings by pushing until the molding locks into place.
  2. Install the door sill trim plates. Refer to DOOR SILL PLATE REPLACEMENT - FRONT  or DOOR SILL PLATE REPLACEMENT - REAR  .
    Fig 1: Installing Pillar Moldings
    G01459319Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals