LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 824 (Bumper System) >> Repair Instructions >> Step Pad Replacement - Side Rear Bumper >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a trim removal tool or suitable replacement, gently pry upward to release the retainers.
  2. Lift up on the step pad and remove from the vehicle.
  3. Fig 1: Removing Step Pad From Vehicle
    G01458599Courtesy of GENERAL MOTORS CORP.