LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 824 (Bumper System) >> Repair Instructions >> Step Pad Replacement - Side Rear Bumper >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the side step pad into the opening on the bumper.
  2. Fig 1: Installing Step Pad To Vehicle
    G01458600Courtesy of GENERAL MOTORS CORP.
  3. Push firmly downward to fully seat the step pad retainers into the bumper.