LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 824 (Bumper System) >> Repair Instructions >> Step Pad Replacement - Rear Bumper >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the step pad to the bumper by pushing down on the clips.
    2. Fig 1: Installing Step Pad To Bumper
    G01458594Courtesy of GENERAL MOTORS CORP.
  2. Insert the side molding push-pins.
  3. Install the bumper. Refer to BUMPER REPLACEMENT - REAR  .
scientia non olet · About LEMON Manuals