LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 822 (Lighting Systems) >> Repair Instructions >> High Mounted Stop Lamp Replacement (Cadillac) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the lift gate window.
  2. Remove the retainers from the stop lamp.
  3. Fig 1: Removing Procedure High Mounted Stop Lamp (Cadillac) (1 Of 2)
    G01457626Courtesy of GENERAL MOTORS CORP.
  4. Lower the lift gate window.
  5. Raise the stop lamp to disconnect the electrical connector from the lamp.
  6. Remove the center high-mounted stop lamp from the vehicle.
  7. Fig 2: Removing Procedure High Mounted Stop Lamp (Cadillac) (2 Of 2)
    G01457627Courtesy of GENERAL MOTORS CORP.