LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 822 (Lighting Systems) >> Repair Instructions >> High Mounted Stop Lamp Replacement (Avalanche) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stop lamp to the cargo box bridge center bar.
    2. Fig 1: Installing Procedure High Mounted Stop Lamp (Avalanche) (1 Of 2)
    G01457638Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector.
  3. Install the panel assembly to the vehicle.
  4. Install the cargo box bridge center bar. Refer to PANEL REPLACEMENT - CARGO BOX BRIDGE CENTER (AVALANCHE) or PANEL REPLACEMENT - CARGO BOX BRIDGE CENTER (ESCALADE EXT) in EXTERIOR TRIM .
  5. Inspect the operation.
  6. Install the rear compartment cover assembly.
    7. Fig 2: Installing Procedure High Mounted Stop Lamp (Avalanche) (2 Of 2)
    G01457639Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals