LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 822 (Lighting Systems) >> Repair Instructions >> Courtesy Lamp/Reflector Replacement - Door >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Gently push the assembly toward the front edge of the door.
  2. Lift the rear of the assembly from the door by using a small flat tool.
  3. Remove the courtesy lamp/reflector from the door panel.
  4. Fig 1: Removing Courtesy Lamp/Reflector From Door Panel
    G01457549Courtesy of GENERAL MOTORS CORP.
  5. Twist and remove the socket container from the housing.
  6. Remove the bulb from the socket (if replacement is required).