Remote Oil Cooler Provision
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Ports for remote-mount oil cooler lines are located on the right side of the converter housing near the converter housing/main housing splitline. Remote oil-to-water coolers require plumbing for transmission fluid and engine-cooling water. Remote oil-to-air coolers may also be used, and only transmission fluid lines need to be provided. Heat is transferred from the transmission fluid to either water or air depending upon the cooler type used.