LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 816 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Bezel Replacement - Floor Console (Luxury Upper) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the I/P cluster bezel. Refer to BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER  .
  2. Insert a flat bladed tool between the Bezel assembly and the console.
  3. Pry the bezel from the console outwards partially in order to gain access to the connectors.
  4. Disconnect the electrical connectors (1).
  5. Remove the bezel from the console.
    Fig 1: Removing Bezel From Console - Luxury Upper
    G01458187Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals