Audio Amplifier Setup
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
For the Bose Amplifier (UQ7, w/Y91), complete the following procedure.
- Turn the ignition ON, engine OFF
- At the Main Menu screen, select Diagnostics.
- At the Vehicle Identification screen, select the following options:
- 3.1. Model Year
- 3.2. LD Trk, MPV, Incomplete
- At the System Selection Menu screen, select Body.
- At the Vehicle Identification screen, select the following options:
- 5.1. C or K(Platform type)
- 5.2. Select the appropriate HVAC system:
- CJ2 Dual Zone HVAC, Auto
- CJ3 Dual Zone HVAC, Manual
- Select Uplevel Radio.
- At the Body screen, select Amplifier.
- Select Special Functions.
- At the Special Functions screen, select Recalibration.
- Select the appropriate body style/vehicle type.
- Press the Setup Module key.
- Verify the scan tool displays "Procedure in Progress."
- When the calibration ends press EXIT on the scan tool.
- Cycle the ignition. Setup is complete.