LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 811 (Wiper System & Washer System) >> Repair Instructions >> Wiper Blade Element Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Replace the wiper blade element if it is removed from the wiper blade.
  1. Remove the wiper blade from the wiper arm. Refer to WIPER ARM BLADE REPLACEMENT  .
  2. Remove the bottom claws (2) of the wiper blade (1) from the notches in the wiper blade element (3).
  3. Fig 1: Removing Wiper Arm Blade Element
    G01457691Courtesy of GENERAL MOTORS CORP.
  4. Pull the wiper blade element (3) out through the wiper blade claws (2).