LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 811 (Wiper System & Washer System) >> Repair Instructions >> Wiper Arm Blade Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to the ACCY position.
  2. Set the wiper switch to the PULSE position.
  3. Turn the ignition OFF when the wipers are in the innerwipe position and not moving.
  4. Push in the button of the wiper blade clip and remove the wiper blade from the inside radius of the wiper arm.
    5. Fig 1: Removing Wiper Arm blade (1 Of 2)
    G01457687Courtesy of GENERAL MOTORS CORP.
  5. Bring the wiper arm out through the opening in the wiper blade.
    6. Fig 2: Removing Wiper Arm Blade (2 Of 2)
    G01457688Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals