LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 811 (Wiper System & Washer System) >> Repair Instructions >> Wiper Arm Blade Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the hook of the wiper arm through the opening in the wiper blade.
  2. Fig 1: Installing Wiper Arm Blade - Rear (1 Of 2)
    G01457717Courtesy of GENERAL MOTORS CORP.
  3. Position the wiper blade pivot in the inside radius of the wiper arm hook.
  4. Fig 2: Installing Wiper Arm Blade - Rear (2 Of 2)
    G01457718Courtesy of GENERAL MOTORS CORP.
  5. Pull the wiper blade pivot into the wiper arm hook until the pivot locks into the hook.
  6. Operate the wipers and inspect for proper operation.