LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 806 (Exterior Trim) >> Repair Instructions >> Panel Replacement - Cargo Box Bridge Side Outer (Avalanche) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cargo Box Bridge Side Outer Panel (Avalanche)
    GM741568Courtesy of GENERAL MOTORS CORP.
  1. Install the side outer panel to the body side outer panel fasteners.
  2. Install the side inner panel. Refer to Panel Replacement - Cargo Box Bridge Side Inner (Avalanche/EXT) .
  3. Install the cargo box bridge center panel. Refer to Panel Replacement - Cargo Box Bridge Center (Avalanche)  or Panel Replacement - Cargo Box Bridge Center (Escalade EXT) .
  4. Install the rear compartment cover assembly.