LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 806 (Exterior Trim) >> Repair Instructions >> Grille Replacement (Avalanche) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Grille Ends To Fender Fasteners
    GM370264Courtesy of GENERAL MOTORS CORP.
  1. Align the grille to the grille support and the fenders.
  2. Press the grille ends in order to secure the grille to the fender.
  3. Fig 2: Push-Pin Retainers & Radiator Grille (Avalanche)
    GM741562Courtesy of GENERAL MOTORS CORP.
  4. Align the radiator grille to the support reinforcement.
  5. Install the push pin retainers (1) to the radiator support.
  6. Close the hood.
  7. Inspect the grille for proper alignment.
  8. For diesel only, install the winter cover, if removed.