Disabling System (Corvette)
WARNING: This page does not describe the selected car, but rather 114 other vehicles, including the 2000 Saturn SW2, 2000 Saturn SL2, 2000 Saturn SL1, 2000 Saturn SL, and 2000 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, follow air bag service precautions. See SERVICE PRECAUTIONS . Turn front wheels to straight-ahead position. Turn ignition switch to LOCK position and remove key.
- Remove SDM fuse (No. 16) from interior fuse block under front floor kick-up panel at passenger side. Wait 10 minutes. Remove lower steering column cover. Remove Connector Position Assurance (CPA) clip. Disconnect driver air bag 2-pin Yellow SIR connector at base of steering column. See Figure.
- For passenger air bag, remove Connector Position Assurance (CPA) clip. Disconnect 2-pin Yellow connector located at base of steering column. See Figure.