LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 798 (HVAC Systems - Manual) >> Repair Instructions >> Air Temperature Actuator Replacement - Right >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of HVAC Module
    GM651483Courtesy of GENERAL MOTORS CORP.
  1. Install the right side air temperature actuator.
  2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the right side air temperature actuator retaining screws.

    Tighten:  Tighten the screws to 1.9 N.m (17 lb in).

  4. Connect the right side air temperature actuator electrical connector.
  5. Install the I/P carrier. Refer to INSTRUMENT PANEL (I/P) CARRIER REPLACEMENT in Instrument Panel, Gages and Console.
  6. Recalibrate the air temperature actuator on vehicles equipped with automatic climate control (C68). Refer to Re-Calibrating Actuators (Primary) Re-Calibrating Actuators (Auxiliary HVAC) .