Vacuum Control System Diagnostic

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Step	Action	Yes	No
1	Start the engine. Allow engine to reach operating temperature. Turn the temperature setting to the hot position. Does warm air flow out of the rear HVAC outlet ducts?	Go to Step 5	Go to Step 2
2	Using an external vacuum source, apply vacuum to the coolant by pass valve assembly. Does the valve open and close?	Go to Step 5	Go to COOLANT BYPASS VALVE REPLACEMENT in Heating, Ventilation and Air Conditioning
3	With the coolant by-pass valve removed, inspect the valve for binding. Does the valve move freely?	Go to Step 5	Go to Step 4
4	Replace the coolant by pass valve. Refer to COOLANT BYPASS VALVE REPLACEMENT . Is the repair complete?	Go to Step 5	Go to COOLANT BYPASS VALVE REPLACEMENT in Heating, Ventilation and Air Conditioning
5	Cycle the HVAC controls in order to verify proper operation. Did you find and correct the condition?	System OK	Go to Step 2