LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 794 (Body & Accessories Control System) >> Passenger Junction Box (PJB) Removal/Installation >> PJB Removal Note

PJB Removal Note

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the screws counterclockwise to remove the PJB.
    NOTE:
    • Screws cannot be removed from the PJB.
      Fig 1: Passenger Junction Box Screws
      G00973462Courtesy of MAZDA MOTORS CORP.
  2. Remove the PJB as shown in the figure.
    Fig 2: Removing Passenger Junction Box
    G00973463Courtesy of MAZDA MOTORS CORP.