Transaxle Mount: Removal

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Remove the left front tire and wheel.
Remove the left inner splash shield. Position a transaxle jack under the transaxle.
Slightly take the weight off mount, and remove the transaxle bracket to transaxle mount upper nuts. See Fig 1 .
Remove the transaxle bracket-to-transaxle bolts. See Fig 2 . Remove the transaxle bracket.

Fig 1: Removing & Installing Transaxle Mount Nuts

Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing & Installing Transaxle Bracket Bolts

Courtesy of GENERAL MOTORS CORP.