LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Automatic Transaxle Servicing) >> Removal & Installation >> THERMO Element >> Removal

THERMO Element: Removal

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pan. See DRAINING & REFILLING  under LUBRICATION.
  2. Remove the thermo element pins and washers (120 and 123). See Fig 1 .
  3. Remove the thermo element (121) and the thermo element plate (122).
Fig 1: Removing & Installing Thermo Element
G00087726Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals