LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 784 (Automatic Transaxle [Service, Removal & Installation]) >> Vehicle Speed Sensor (VSS) Inspection >> Visual Inspection

Visual Inspection

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the VSS. (See VEHICLE SPEED SENSOR (VSS) REMOVAL/INSTALLATION .)
  2. Verify that the sensor is free of any metallic shavings or particles.
    • If there is any malfunction, clean them off.
  3. Install the VSS. (See VEHICLE SPEED SENSOR (VSS) REMOVAL/INSTALLATION .)
scientia non olet · About LEMON Manuals