Operating Inspection

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Verify that the starter operates only when the ignition switch is turned to the START position with the selector lever in P or N position.
- If there is any malfunction, adjust the TR switch.
Verify that the back-up lights illuminate when shifted to R position with the ignition switch at the ON position.
- If there is any malfunction, adjust the TR switch.
Verify that the positions of the selector lever and the indicator are aligned.
- If there is any malfunction, adjust the TR switch.
Fig 1: Locating P Position On Indicator And Selector Lever
Courtesy of MAZDA MOTORS CORP.