Clutch Release Collar Inspection

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Do not clean the clutch release collar with cleaning fluids or a steam cleaner because it is filled with grease.

Remove the clutch release collar.
Turn the collar while applying force in the axial direction, and inspect for sticking, excessive resistance, and an abnormal noise.

Fig 1: Inspecting Collar
Courtesy of MAZDA MOTORS CORP.
- If there is any malfunction, replace the clutch release collar.
Install the clutch release collar.