Starter Interlock Switch Installation Note

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Insert the new starter interlock switch into the pedal bracket hole in the direction indicated by arrow A.

Fig 1: Installing Starter Interlock Switch
Courtesy of MAZDA MOTORS CORP.
Slide the starter interlock switch pressing it in the direction indicated by arrow B until it is locked.
Press the clutch pedal fully in the direction indicated by arrow C and adjust the starter interlock switch terminal.

Fig 2: Adjusting Starter Interlock Switch
Courtesy of MAZDA MOTORS CORP.