Clutch Pedal Position Switch Inspection

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Disconnect the clutch pedal position switch connector.
Verify continuity as indicated in the table.
- If there is any malfunction, replace the clutch switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION .)
Fig 1: Clutch Pedal Position Switch Continuity Table
Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Clutch Pedal Position Switch Connector Terminals
Courtesy of MAZDA MOTORS CORP.