LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Engine Controls - Self-Diagnostics - 4.8L, 5.3L & 6.0L) >> Inspection/Maintenance Procedures >> Inspection/Maintenance Catalyst System Set Procedure >> Description

Inspection/Maintenance Catalyst System Set Procedure: Description

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, and 2002 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.

The purpose of this test is to satisfy the enable criteria necessary to execute Inspection/Maintenance readiness diagnostics for the catalyst system. The test may be used to set the I/M System Status indicators to YES. Ensure that the vehicle meets the requirements listed in Conditions for Running before performing this test. Failure to meet the necessary requirements may produce inaccurate test results.