LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 777 (Body Panels) >> Rear Bumper Removal/Installation >> Rear Bumper Installation Note

Rear Bumper Installation Note

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Spread the rear bumper ends (wheel arches) apart.
  2. Attach the rear bumper to the body.
  3. Press the rear bumper connecting area into the body to engage with the bumper slider.
scientia non olet · About LEMON Manuals