LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 777 (Body Panels) >> Fuel-Filler Lid Removal/Installation

Fuel-Filler Lid Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bolts.
  2. Remove the fuel-filler lid.
  3. Install in the reverse order of removal.
  4. Adjust the fuel-filler lid. (See FUEL-FILLER LID ADJUSTMENT .)
    Fig 1: Fuel-Filler Lid With Torque Specifications
    G02566595Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals