LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 771 (Power Steering System) >> Power Steering Fluid Inspection >> Fluid Leakage Inspection

Fluid Leakage Inspection

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start the engine and idle it.
  2. Turn the steering wheel fully to left or right, to generate the fluid pressure.
    CAUTION:
    • Do not maintain the steering wheel fully turned for 5 s or more. It is possible that oil temperature can rise and this will negatively affect the oil pump.
  3. Inspect for the fluid leakage at the points indicated in the figure.
    • If fluid leakage is found, repair the related parts.
    Fig 1: Locating Fluid Leakage Inspection Points
    G00975753Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals