LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 768 (Body Rear End) >> Repair Instructions >> Compartment Sill Plate Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the rear compartment sill trim plate.
  2. Press down in order to engage the retaining clips. Ensure that the retainers lock into place.
  3. Close the rear compartment.
    Fig 1: Installing Rear Compartment Sill Trim Plate
    G01780694Courtesy of GENERAL MOTORS CORP.