LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 759 (Engine Mechanical (Service Information)) >> Timing Chain Removal/Installation >> Front Oil Seal Installation Note

Front Oil Seal Installation Note

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply clean engine oil to the oil seal.
  2. Push the oil seal slightly in by hand.
  3. Compress the oil seal using the SST  and a hammer.
Fig 1: Compressing Oil Seal Using Special Service Tool
G00973750Courtesy of MAZDA MOTORS CORP.
Fig 2: Installing Oil Seal
G00973751Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals