Ignition Timing Inspection
WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Ignition timing is not adjustable.
- Ignition timing verification requires WDS or equivalent.
- Verify that the ignition timing (WDS: SPARKADV PID) is within the specification using WDS or equivalent.
- Ignition Timing Approx. BTDC 8°
- Verify that ignition timing advances when the engine speed increases gradually.
- If there malfunction, refer to "ENGINE SYMPTOM TROUBLESHOOTING". (See ENGINE SYMPTOM TROUBLESHOOTING .)