LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 758 (Symptom Troubleshooting [Engine Mechanical]) >> Engine Control System Operation Inspection >> Variable Tumble Control Operation Inspection >> Notes

Variable Tumble Control Operation Inspection: Notes

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the WDS or equivalent to the DLC-2.
  2. Access ECT PID.
  3. Verify that ECT PID is below 61.9 °C {143.4 °F} (LF), below 63 °C {145 °F} (L3)  .
  4. Start the engine.
  5. Inspect rod operation under the following conditions:
scientia non olet · About LEMON Manuals