LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 755 (Manual Transmission - NV 4500) >> Repair Instructions >> Transmission Mount Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Broken or deteriorated mounts can cause misalignment and destruction of certain drive train components. When a single mount breaks, the remaining mounts are subjected to abnormally high stresses.
  1. Raise and suitably support the vehicle.
  2. Remove the transmission mount to crossmember nut.
    Fig 1: Transmission Mount To Crossmember Nut
    G01715403Courtesy of GENERAL MOTORS CORP.
  3. Remove the transmission mount to transmission bolts.
  4. Raise the transmission just enough, in order to permit removal of the mount using a suitable transmission jack.
  5. Remove the transmission mount.
    Fig 2: Transmission Mount
    G01715404Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals