Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the insulator to the transmission case.
- Install a NEW shift lever insulator.
- Install the shift lever seal and lever.
- Install the shift lever bolts. Tighten the shift lever bolts to 20 N.m (15 lb ft).
- Install the boots.
- Install the control lever and boot.