LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 755 (Manual Transmission - NV 4500) >> Repair Instructions >> Backup Lamp Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure the seal is installed on the switch.
  2. Install the backup lamp switch. Tighten the backup lamp switch to 28 N.m (21 lb ft).
  3. Connect the backup lamp switch electrical connector (1).
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals