Installation Procedure.
WARNING: This page is about a different car, the 2002 GMC Sierra and 2002 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Apply sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent to theoil drain and fill plug threads.
- Using J 36511 install the oil drain plug. Tighten the oil drain plug to 30 N.m (22 lb ft).
- Remove and drain the drain pan used to catch the used transmission fluid.
- Fill the transmission to just below the bottom of the fill plug hole. Refer to SPECIFICATIONS .
- Using J 36511 install the oil fill plug. Tighten the oil fill plug to 30 N.m (22 lb ft).
- Lower the vehicle.