LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 754 (Manual Transmission - NV 3500) >> Repair Instructions >> Backup Lamp Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra and 2002 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Important:  The backup lamp switch has pre-applied thread sealant on the threads.

  1. Install the backup lamp switch. Tighten the backup lamp switch to 37 N.m (27 lb ft).
  2. Connect the backup lamp switch electrical connector (3).
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals