LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 753 (Body Front End) >> Repair Instructions >> Hood Insulator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the hood insulator (2) to the hood.
  2. Install the hood insulator push-in retainers (3).
  3. Close the hood.
    Fig 1: Locating Hood Components
    G01780149Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals