LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 753 (Body Front End) >> Repair Instructions >> Hood Bumper Replacement (Side) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Remove the hood side bumper (1) from the fender by sliding the bumper rearward.
    Fig 1: Removing Hood Side Bumper
    G01780129Courtesy of GENERAL MOTORS CORP.
  3. Remove the adjustable front hood bumper (1) from the radiator support by rotating counterclockwise.
    Fig 2: Removing Adjustable Front Hood Bumper
    G01780130Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals