LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 752 (Engine Mechanical - 3.1L (Unit Repair)) >> Repair Instructions >> Oil Cooler Removal

Oil Cooler Removal

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the upper oil cooler outlet hose from the thermostat bypass pipe.
  2. Disconnect the lower oil cooler outlet hose from the oil cooler.
  3. Remove the oil cooler outlet hoses and pipe.
    Fig 1: Removing Oil Cooler Outlet Hoses & Pipe
    G01811034Courtesy of GENERAL MOTORS CORP.
  4. Remove the oil cooler connector.
    Fig 2: Removing Oil Cooler Connector
    G01811035Courtesy of GENERAL MOTORS CORP.
  5. Remove the oil cooler inlet hose clamp and oil cooler.
    Fig 3: Removing Oil Cooler Inlet Hose Clamp & Oil Cooler
    G01811036Courtesy of GENERAL MOTORS CORP.
  6. Remove the oil cooler inlet hose and oil cooler inlet hose clamp from the oil cooler hose fitting.
    Fig 4: Removing Oil Cooler Inlet Hose & Oil Cooler Inlet Hose Clamp
    G01811037Courtesy of GENERAL MOTORS CORP.
  7. Remove the oil cooler hose fitting.
Fig 5: Removing Oil Cooler Hose Fitting
G01811038Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals