Engine Pistons, Engine Piston Pins & Engine Piston Rings
WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE PISTONS, ENGINE PISTON PINS & ENGINE PISTON RINGS
| Application | In. (mm) | ||
|---|---|---|---|
| Pistons | |||
| Clearance | .0013-.0027 (.033-.069) | ||
| Diameter (Standard) | 3.5029-3.5040 (88.974-88.984) | ||
| Pin Bore Diameter | .9057-.9060 (23.005-23.012) | ||
| Pins | |||
| Diameter | .9052-.9054 (22.992-22.996) | ||
| Piston Fit (Clearance) | .0004-.0008 (.010-.020) | ||
| Rod Fit (Interference) | .0006-.0018 (.015-.046) | ||
| Rings | |||
| No. 1 | |||
| End Gap | .006-.014 (.15-.36) | ||
| Side Clearance | .0020-.0033 (.051-.084) | ||
| No. 2 | |||
| End Gap | .020-.028 (.51-.71) | ||
| Side Clearance | .0020-.0035 (.051-.089) | ||
| No. 3 (Oil) | |||
| End Gap | .010-.05 (.25-1.3) | ||
| Side Clearance (Maximum) | .008 (.20) | ||