Cylinder Block

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER BLOCK

Application

In. (mm)

Cylinder Bore

Diameter (Standard)

3.5046-3.5053 (89.017-89.035)

Out-Of-Round (Maximum)

.0005 (.013)

Taper (Maximum)

.0008 (.020)

Deck Warpage (Maximum)

⁽¹⁾ .005 (.13)

⁽¹⁾	DO NOT remove more than .010" (.25 mm) material from original surface of cylinder block deck.