LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 748 (Engine Mechanical - 3.1L (On-Vehicle)) >> Repair Instructions >> Drive Belt Tensioner Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Rotate the drive belt tensioner using the J 39914  .
  2. Remove the drive belt from the generator pulley.
    Fig 1: Removing Drive Belt
    G01810880Courtesy of GENERAL MOTORS CORP.
  3. Remove the tensioner bolt.
  4. Remove the tensioner.
    Fig 2: Removing Drive Belt Tensioner
    G01810881Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals