LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 742 (Wiper System And Washer System) >> Repair Instructions >> Wiper Arm Blade Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to the ACCY position.
  2. Set the wiper switch to the INT position.
  3. Turn the ignition off when the wipers are in the mid wipe position.
  4. Push in the button of the wiper blade clip and remove the wiper blade from the inside radius of the wiper arm.
    Fig 1: Locating Wiper Blade Clip Button
    G01779731Courtesy of GENERAL MOTORS CORP.
  5. Bring the wiper arm out through the opening in the wiper blade.
    Fig 2: Removing Wiper Arm Blade
    G01779732Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals