LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 741 (Engine Cooling System) >> Repair Instructions >> Radiator Hose Replacement - Inlet >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the radiator inlet hose (2) and the clamps (1) to the radiator and the coolant outlet.
  2. Using the J 38185,  reposition and install the hose clamps at the radiator and the coolant outlet.
  3. Fill the cooling system. Refer to Draining and Filling Cooling System  .
    Fig 1: Installing Radiator Inlet Hose
    G01811357Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals